Unless stated all items are OO Gauge (1:76)
Welcome to our New website - we hope you find what you are looking for
T: (+44) 0114 3216 160
T: (+44) 0114 2647 449
M: 07557 126 651
Email: support@oliviastrains.com
Mon – Fri 09.30 to 1700
Visiting us: Please book an appointment
Closed Weekends
But available to Call 0755 7126 651
to speak to a member of staff
T: (+44) 0114 3216 160
T: (+44) 0114 2647 449
M: 07557 126 651
Email: support@oliviastrains.com
Christmas Opening Times
Tues 27th 10am – till 4pm,Weds 28th 10am – till 4pm
Thurs 29th 10am-5pm,Fri 30th 10-5pm,Sat 31st CLOSED
Mon 2nd Closed,Tues 3rd Back to Normal times
0114 3216 160
Categories
Look below to help work out the cost of additional work to locos that you are sending/ dropping off to us.
When sending a loco for sound fitting, we recommend that you remove loose detailing/ paperwork from the box, we cannot be held responsible for items lost/ damaged.
Always include a cover letter with your item with your details and what work you require.
Failure to do will result in your order being delayed.
Olivia’s Trains
25a Mansfield Road
Intake
Sheffield
S12 2AE.
£140 – Re-motoring Using 2x Eurostar Power Bogies.
Additional DCC Services
£120 – DCC Working Direction Head/Tail Lights To Both Ends. (Includes 2x Decoders)
£145 – ESU V5 Sound Fitting.
£ 10 – Cab Light (Per Cab)
£36 – Additional Fitting Service. (Per Intermediate Coaches)
£12 – Internal Lighting (Per Coach) Does not include Centre Motor Car.
£21 – DCC fitting (Per Intermediate Coach) allows turn On/Off of each Coach Lighting.
This is the price for a standard steam locomotive fitted with our sound (Hornby Bachmann Etc- No Tender Drive or Split Chassis)
The decoder is fitted into locomotive on most but New Models now have the socket in the Tender & speaker into the tender, this makes the loco and tender permanently coupled, there are only 3 locos we can fit everything into the boiler, this is the A4, Streamlined Coronation & Un Rebuilt Bulleid Pacific.
This is the price for a standard steam locomotive fitted with a Lokpilot DCC Decoder (Hornby Bachmann Etc- No Tender Drive or Split Chassis) for use with the Stay alive powerpack (54671.)
We Refit the speaker correctly to get rid of that horrible “Tinny” Rattle. This price also includes a reblow to our sound normally at £15.
This is a one off charge for fitting of additional work.
We Can now fit many additional extra’s from Working Oil lamps, Firebox Flicker & Seuthe Smoke Units to most of your steam locos, just tell us what you require & we will guide you through what & which we can do. The loco must be DCC fitted Due To The Work Involved.
with the above £36 charge, the following is available:
Depending on what class of train your loco has changes how many lamps you require. let us know what class you want.
The position of the oil lamps told the ground/ signalling staff what type of train is being hauled.
Click here for the various (BR Standard) Lamp Positions.
This options add the firebox flicker to your loco (must be fitted with sound or with a decoder) or our Additional Fitting Service
This options add the firebox flicker to your loco (must be fitted with sound or with a ot decoder)
This Cost is if NOT taking Any Additional Fitting Services, this does not have the £36 cost (Other work will incur the £36 charge.)
Please note due to Shipping regulations regarding Flamable Liquids we cannot post Smoke Oil using Royal Mail. This is our Standard Courier. We can post out for UK customers using a different Courier a Large 4.5oz Bottle for £25 on Request
This can be fitted to most locos fitted with a decoder.
Warning: The smoke unit does not have an emergency cut out, this is operated by a function button (F6 on our sound projects) if left on without smoke oil, it can cause irreparable damage to your locomotive, we cannot be held responsible if this occurs.
This is the price for fitting sound into Diesel/ Electric locos. this charge applies for any standard ’00’ Gauge model.Locos with different requirements are listed below.
This is the price for a standard Diesel/ Electric locomotive fitted with a Standard DCC Decoder (Hornby Bachmann Etc- No Tender Drive or Split Chassis)
We Refit the speaker correctly to get rid of that horrible “Tinny” Rattle. This price also includes a reblow to our sound at £12.
Some locos are still produced without working lights (Bachmann Class 20 cab end only for example) we produce our own lighting kits to fit in. this price is for a standard diesel/ electric fitted with working head & tail lights (Specific to the locomotive)
for multiple units, the lighting charge applies per car (£72 for both cars)
Class 20 charge is £36 for cab end lights or £50 for lights in both ends of the locomotive.
The Class 08 is quite a tricky one, we can also fit working marker lights (£36).
We can fit the ESU Stay alive Power pack, this is ideal for locos with short wheelbases (Class 08 for example) This allows the loco to store power to help get it across dirty or uneven track.This can only be fitted to the Loksound V5 Or Lokpilot
We fit a bass reflex speaker into the fuel tank of the Deltic to give it the proper Napier throb.For Sound Fitted Models This Costs Just £48!
Classes:- Derby Lightweight/105/108 require a decoder in both cars, we fit the sound into the motor car and a standard decoder into the dummy car to operate the lights (Derby Lightweight Costs £164). Requires 6 Pin in Dummy Car
Classes 158/159/ 166/168 & 170 are not DCC ready, we hard wire the 3 decoders in + make the lights work correctly on DCC.
Classes 158/159/ 166/168 & 170 are not DCC ready, we hard wire the 3 decoders in + make the lights work correctly on DCC.
We can convert your voyager to DCC with correct working lights and sound.
We can fit two sound decoders, each with speaker and convert the ends to have correct lighting on DCC.They are then set up so the horns/ functions work in the direction of travel (Horns from the front, whistle from the Back.)
We can alter the wiring on all Bachmann Locos to let you operate the tail lights independently, you can switch off the tail lights when backed up to a train or leave both ends on when parked on a middle road.The Loco Must Be DCC Fitted.Normally Operated (on our sound projects) using F6 & F7 Standard DCC= F1 / F2.
We can alter the wiring on all Hornby Diesels to let you operate the tail lights independently, you can switch off the tail lights when backed up to a train or leave both ends on when parked on a middle road- This is not an easy task (hence the price difference.)The Loco Must Be DCC Fitted.Normally Operated (on our sound projects) using F6 & F7 Standard DCC= F1 / F2.
If DCC/ Sound Fitted we can fit working cab lights to your loco’s.
We can reblow your loksound decoder to our sound, we recommend sending just the decoder rather than the whole loco, this saves on your postage! (Be aware some projects are V4 & V5 Only)
On V4 & V5 if you have a Lok Programmer we can email you the file once you supply the Decoder serial number, this is a unquince number & can only be blow into the decoder you give the serial number far
We can weather your locos to suit (the loco must be purchased from us or have additional work done to the loco)
Tell us your finish (got a photo, we’ll match the effect) average turnaround 1-2 weeks.
Add £30 if you want the loco renamed (please note specialised nameplates may take longer and cost more please contact to discuss)
Olivia’s Trains & Models
25A Mansfield Road
Intake
Sheffield
S12 2AE
Telephone:
0114 2647 449 / 0114 3216 160 & 0755 7126 651: – During shop hours.
© Olivias Trains Copyright 2020
site by firepages